Product Catalog · Rev 2026-01

Vertical transportation, engineered for every use case.

Passenger, home, hospital, cargo and specialty units — each configurable to shaft, load and duty cycle, engineered to EN 81-20/50 and EN 115-1.

Doc · LT-CAT-2026-01Standards · EN 81-20/50 · EN 115-1 · ISO 9001Region · Pakistan (PK)Issued by · Liftech Engineering

Catalog Index · 12 product families

Explore every Liftech elevator, escalator, moving walk and dumbwaiter.

LT-PAX

Passenger Elevators

Gearless MRL traction · EN 81-20/50 · residential & commercial

PKR 3.8M – 6.4Mindicative

Rated load: 450 · 630 · 800 · 1000 · 1275 · 1600 kg · Rated speed: 1.0 · 1.5 · 1.75 · 2.0 · 2.5 m/s

LT-VILLA

Home Elevators

MRL residential · low pit · low overhead · whisper-quiet

PKR 2.4M – 3.6Mindicative

Rated load: 250 · 320 · 400 kg (3–5 persons) · Rated speed: 0.4 · 0.6 m/s

LT-MED

Hospital Elevators

Stretcher-ready · ±3 mm re-levelling · antimicrobial finishes

PKR 5.6M – 9.2Mindicative

Rated load: 1600 · 2000 · 2500 kg · Rated speed: 1.0 · 1.6 m/s

LT-FRT

Freight Elevators

Reinforced sling · industrial duty · 2000–5000 kg

PKR 4.6M – 8.2Mindicative

Rated load: 2000 · 3000 · 4000 · 5000 kg · Rated speed: 0.25 · 0.4 · 0.5 · 0.63 m/s

LT-CGO

Cargo Elevators

Hand-loaded goods · Class A duty · 1000–2000 kg

PKR 4.2M – 7.6Mindicative

Rated load: 1000 · 1275 · 1600 · 2000 kg · Rated speed: 0.4 · 0.63 · 1.0 m/s

LT-AUTO

Automobile Elevators

Car parking lifts · 2500–5000 kg · turntable optional

PKR 6.8M – 12.5Mindicative

Rated load: 2500 · 3500 · 5000 kg · Rated speed: 0.25 · 0.4 · 0.5 m/s

LT-MR

Machine Room Elevators

Geared / gearless traction with dedicated overhead machine room

PKR 3.6M – 6.8Mindicative

Rated load: 630 – 5000 kg · Rated speed: 1.0 – 4.0 m/s

LT-MRL

Machine Room-Less Elevators

Compact PMSM gearless · saves up to 8 m² per shaft

PKR 3.9M – 7.2Mindicative

Rated load: 450 – 1600 kg · Rated speed: 1.0 – 1.75 m/s

LT-HYD

Hydraulic Elevators

Direct / indirect ram · low overhead · heavy load

PKR 3.2M – 5.8Mindicative

Rated load: 630 – 5000 kg · Rated speed: 0.25 · 0.4 · 0.63 m/s

LT-ESC

Escalators

EN 115-1 heavy-duty · 30°/35° · commercial & public transport

PKR 6.5M – 11.8Mindicative

Type: Commercial · public-transport heavy-duty · Incline: 30° · 35°

LT-MW

Moving Walks

0°–12° inclined · pallet-type · airports & transit

PKR 7.2M – 13.5Mindicative

Type: Pallet-type (horizontal / inclined) or belt-type · Incline: 0° (horizontal) · 10° · 12°

LT-DW

Dumbwaiters

Service lifts · food & document transport · 50–300 kg

PKR 0.8M – 1.6Mindicative

Rated load: 50 · 100 · 200 · 300 kg · Rated speed: 0.3 · 0.4 m/s

Liftech passenger elevator with brushed stainless steel interior in a Karachi office tower

LT-PAX

Gearless MRL traction · EN 81-20/50 · residential and commercial mid-rise

Passenger Elevators

Series · LT-PAX

Engineered for residential towers, office buildings and mixed-use developments across Pakistan. Configurable cabin, door and finish options with Monarch NICE 3000+ control and Fuji Frenic Lift VVVF drive.

Indicative pricePKR 3.8M – 6.4M630–1000 kg · 5–8 stops · MRL gearless · standard SS 304 cabin · supply & install, not a quotation

Technical data

Rated load: 450 · 630 · 800 · 1000 · 1275 · 1600 KG
Rated speed: 1.0 · 1.5 · 1.75 · 2.0 · 2.5 m/s
Travel / stops: Up to 90 m · up to 32 stops
Drive system: PMSM gearless traction, closed-loop vector
Machine: Torin / Ziehl-Abegg ZAtop SM200 gearless
Controller: Monarch NICE 3000+ (serial, CAN-bus)
VVVF inverter: Fuji Frenic Lift LM2A · regen optional
Suspension: 8×19 Seale rope, Ø10/13 mm, 2:1 roping
Guide rails: T89 / T125 machined, ±0.5 mm plumb
Safety: ARD, UCM, overspeed governor, progressive gear
Standards: EN 81-20 / 81-50 / 81-28 / 81-70 · ISO 9001
Duty cycle: 180 starts/hour · S3 60%

Cabin & signalling

Cabin sizes: 1100×1400 · 1400×1600 · 1600×1700 mm
Door type: Center-opening / side-opening 2P / 4P
Door opening: 700 · 800 · 900 · 1100 mm
Finishes: SS 304 hairline · SS 316 · PVD gold/rose · glass
Ceiling: LED downlight + emergency luminaire
COP / LOP: TFT 7" / 10" · Braille tactile · voice

Engineering features

Group control up to 8 cars with destination dispatch
Regenerative drive option (recovers 20–35% braking energy)
IoT-ready via Liftech Smart Gateway (Modbus/CAN)
Anti-vibration ride quality ≤15 mg horizontal (ISO 18738-1)

View full technical page Request datasheet & quotation

Compact home elevator installed inside a modern Lahore residence

LT-VILLA

MRL residential · low pit · low overhead · whisper-quiet

Home Elevators

Series · LT-VILLA

Discreet residential lifts with bespoke cabin design, low pit and overhead requirements — ideal for villas, townhouses and rooftop-access retrofits.

Indicative pricePKR 2.4M – 3.6M250–400 kg · 2–4 stops · MRL · veneer or glass cabin · supply & install, not a quotation

Technical data

Rated load: 250 · 320 · 400 KG (3–5 persons)
Rated speed: 0.4 · 0.6 m/s
Travel / stops: Up to 15 m · 2–6 stops
Drive system: PMSM gearless MRL, 1.5–3.7 kW
Controller: Monarch NICE 1000 / NICE 3000
Shaft: Concrete or self-supporting steel structure
Pit / overhead: Pit 350–800 mm · overhead 2400–2800 mm
Power supply: 1-phase 220 V or 3-phase 380 V
Standards: EN 81-20 / 81-50 · EN 81-41 (accessibility)

Cabin & signalling

Cabin sizes: 900×1000 · 1000×1250 · 1100×1400 mm
Door type: Automatic center or manual swing
Finishes: Wood veneer · glass · SS 304 · painted steel
Ceiling: LED spot + indirect ambient
COP: Backlit micro-touch, floor label plates

Engineering features

Ultra-quiet ≤55 dB(A) at 1 m in cabin
Home UPS / ARD keeps lift usable during load-shedding
Compact shaft (min 1250×1250 mm structural)
Custom cabin design coordinated with interior architect

View full technical page Request datasheet & quotation

Hospital bed lift with 1400 mm wide stretcher door and antimicrobial stainless steel walls

LT-MED

Stretcher-ready · precision leveling ±3 mm · antimicrobial finishes

Hospital Bed Lifts

Series · LT-MED

Stretcher-ready lifts for hospitals, diagnostic centres and senior living. Engineered to EN 81-20/50 with hospital-priority operation, independent service and dual power.

Indicative pricePKR 5.6M – 9.2M1600–2500 kg · 5–10 stops · stretcher-width door · ±3 mm leveling · supply & install, not a quotation

Technical data

Rated load: 1600 · 2000 · 2500 KG
Rated speed: 1.0 · 1.6 m/s
Travel / stops: Up to 45 m · up to 20 stops
Drive system: PMSM gearless, closed-loop vector
Leveling accuracy: ±3 mm (re-leveling with doors open)
Controller: Monarch NICE 3000+ with hospital priority I/O
Safety: ARD, UCM, dual brake, load-weighing
Standards: EN 81-20/50 · EN 81-70 · EN 81-72 optional

Cabin & signalling

Cabin sizes: 1400×2400 · 1600×2500 · 1800×2700 mm
Door opening: 1100 · 1200 · 1400 mm center-opening 2P
Finishes: AISI 316 · antimicrobial PVC · Corian panels
Handrails: SS 316 tubular, 900 mm above floor
Ceiling: Diffused LED · IP44 emergency light
Signalling: Voice announcement · pictogram · Braille

Engineering features

Hospital-priority key operation and independent service
Isolated ward / OT mode with silent arrival tone
Antibacterial cabin package (JIS Z 2801 tested)
Dual power source with automatic ATS transfer

View full technical page Request datasheet & quotation

Industrial 3000 KG cargo lift in a Pakistani warehouse with reinforced sling and roller-shutter doors

LT-FRT

2000–5000 KG · T125 rails · industrial duty · roller-shutter or bi-parting doors

Heavy-Duty Cargo Lifts

Series · LT-FRT

Freight elevators for textile mills, warehouses, cold storage and food processing — reinforced sling, industrial guide rails and heavy-duty duty cycle. Load-tested at handover per EN 81-50.

Indicative pricePKR 4.2M – 7.6M1000–2000 kg · 4–6 stops · industrial finish · supply & install, not a quotation

Technical data

Rated load: 2000 · 3000 · 4000 · 5000 KG
Rated speed: 0.25 · 0.4 · 0.5 · 0.63 m/s
Travel / stops: Up to 40 m · up to 12 stops
Drive system: PMSM gearless or Montanari geared 2:1
Controller: Monarch NICE 3000+ cargo profile
Guide rails: T89 / T125 machined
Suspension: 8×19 Seale Ø13 mm, 4-rope minimum
Doors: Bi-parting 2B, vertical roller-shutter or manual swing
Overload: Load-weighing with pre-torque compensation
Standards: EN 81-20 / 81-50 · fire-rated E60/E120 optional

Cabin & signalling

Cabin sizes: 1600×2000 up to 2500×3500 mm
Floor: Checker-plate steel or non-slip anti-static
Wall protection: SS 304 bump rails · rubber corner guards
Signalling: Robust illuminated buttons IP54

Engineering features

Trolley / forklift ready loading (subject to configuration)
Continuous S3 40% duty for shift-based operations
PEC-compliant electrical package and load-test certificate
Optional gas-fired or electric shaft heater for cold storage

View full technical page Request datasheet & quotation

Liftech Global commercial high-rise elevators in Pakistan — machine room traction lifts with destination dispatch group control (CE / EN 81-20/50 / ISO 9001:2015)

LT-HRISE

Group control · destination dispatch · energy regeneration

Commercial High-Rise

Series · LT-HRISE

For Grade-A commercial towers where waiting time, journey time and energy efficiency are the primary KPIs. Traffic simulation with RTD3/Elevate delivered as part of the design.

Indicative pricePKR 3.6M – 6.8M630–1600 kg · geared or gearless with machine room · supply & install, not a quotation

Technical data

Rated load: 1000 · 1275 · 1600 · 2000 KG
Rated speed: 2.5 · 3.0 · 4.0 m/s
Travel / stops: Up to 150 m · up to 40 stops
Group size: Up to 8 cars per group
Control: Destination dispatch (DCS) with lobby kiosks
Drive: Regenerative VVVF (Fuji / Yaskawa)
Ride quality: ≤10 mg horizontal (ISO 18738-1)
Standards: EN 81-20 / 81-50 / 81-72 firefighter option

Cabin & signalling

Cabin sizes: 1600×1700 · 1800×2100 mm
Finishes: Custom stainless, glass, back-lit onyx, timber
Ceiling: Custom architectural LED
COP / LOP: 10" TFT with BMS-linked information layer

Engineering features

Traffic simulation (5-min up-peak, interval, HC-5) at design stage
BMS/BAS integration over BACnet/IP or Modbus TCP
Fire recall (Phase I/II) and firefighter operation ready
Advance-door-opening for shorter door-dwell in DCS mode

View full technical page Request datasheet & quotation

Stainless steel escalator with LED handrail lighting installed in an Islamabad shopping mall

LT-ESC

EN 115-1 heavy-duty · 30°/35° · step widths 600/800/1000 mm

Escalators & Moving Walks

Series · LT-ESC

For malls, metros, airports and public transport hubs — heavy-duty rated with auxiliary brake, step-level monitoring and skirt-safety switches. Commissioning includes full-load run-in and brake torque validation.

Indicative pricePKR 6.5M – 11.8MEN 115-1 · 30° · 800/1000 mm step · 3.5–6 m rise · supply & install, not a quotation

Technical data

Type: Commercial · public transport heavy-duty
Incline: 30° · 35°
Step width: 600 · 800 · 1000 mm
Rise: Up to 15 m per unit
Speed: 0.5 · 0.65 · 0.75 m/s
Steps: Die-cast aluminium, comb-plate impact switch
Handrail: Synthetic composite, speed-monitored
Drive: Helical bevel gear, VVVF start/stop
Standards: EN 115-1:2017 · public transport annex

Cabin & signalling

Balustrade: 10 mm tempered glass or SS 304 solid
Skirt panels: SS 304, low-friction coated
Handrail: Black standard · custom colour / illuminated
Lighting: LED under-step, comb-plate and handrail-inlet

Engineering features

Auxiliary brake and operational brake (EN 115-1 §5.4)
Skirt-safety, step-level, missing-step and reversal switches
Auto start/stop with IR passenger detector (energy save)
Anti-slide devices and inspection sockets at both landings

View full technical page Request datasheet & quotation

Explore Liftech

Engineering, parts, brands and compliance — everything behind the catalog.

Services

Installation, modernization, AMC and 24/7 emergency response across Pakistan.

Parts & Components

Monarch, Fuji Drive, Torin, Monadrive, Ziehl-Abegg — genuine controllers, drives and traction machines.

Brands

34+ global OEM brands — KÖHLER, Otis, KONE, Schindler, Mitsubishi, Hitachi, Fujitec and more.

Standards & Compliance

EN 81-20/50, EN 115-1, ASME A17.1, ISO 8100 and PEC-registered engineering.

Technical Downloads

OEM catalogues, wiring diagrams and datasheets for elevator and escalator systems.

Engineering Blogs

Deep-dive articles on elevator brands, ride quality, IoT, fire lifts and modernization.

Coverage · Karachi · Lahore · Islamabad

Supplied, installed and maintained from three regional offices.

Head Office

Karachi

Office No. A06, 1st Floor, Plot No. 16, Main Saba Avenue, Near Avenue Park, DHA Phase 6, Karachi, Sindh, Pakistan

+92 333 4455325

info@elevatorescalators.com

Mon–Sat · 09:00–18:00 · 24/7 emergency

Regional Office

Lahore

Gulberg III, Lahore, Punjab, Pakistan

+92 333 4455325

info@elevatorescalators.com

Mon–Sat · 09:00–18:00 · 24/7 emergency

Regional Office

Islamabad

Blue Area, Islamabad, ICT, Pakistan

+92 333 4455325

info@elevatorescalators.com

Mon–Sat · 09:00–18:00 · 24/7 emergency

Ready to specify?

Talk to a Liftech engineer about your project.

Send us shaft dimensions, load, travel and stops — we'll return an engineered proposal with cabin, drive, controller and compliance package.

Request quotation +92 333 4455325