Question 1

What vertical transportation services does Liftech Global Elevators & Escalators provide?

Accepted Answer

Liftech Global Elevators & Escalators specializes in the design, installation, modernization, and maintenance of custom elevators, escalators, and industrial cargo lifts for corporate and commercial buildings across Pakistan.

Question 2

Do you provide smart IoT monitoring for elevator control boards?

Accepted Answer

Yes, our engineering team designs custom Industrial IoT gateway solutions and embedded systems for elevator controllers. This allows for real-time smart monitoring, remote diagnostics, and predictive maintenance protocols.

Question 3

How much experience does the engineering team at Liftech Global Elevators have?

Accepted Answer

Our core technical team has over 10 years of hands-on experience in the elevator and vertical transportation industry, ensuring strict compliance with global safety standards.

Question 4

What types of elevators does Liftech engineer in Pakistan?

Accepted Answer

Liftech supplies passenger elevators (450–1600 KG, 1.0–2.5 m/s), home lifts (250–400 KG, 0.4 m/s), hospital bed lifts (1600–2500 KG, 1.0–1.6 m/s), heavy-duty cargo lifts (2000–5000 KG, 0.25–0.63 m/s), commercial high-rise group control systems (up to 8 cars, 2.5+ m/s with destination dispatch), plus EN 115-1 escalators and moving walks (600/800/1000 mm step width, 30°/35° incline, 0.5–0.75 m/s).

Question 5

What is a machine-room-less (MRL) elevator and why does it matter?

Accepted Answer

An MRL elevator uses a compact permanent-magnet synchronous gearless traction machine mounted inside the shaft at the top overhead, eliminating a rooftop machine room. It reclaims 6–9 m² of built-up area per shaft, cuts civil cost, reduces energy use by 30–45% versus a geared machine, runs 5–10 dB(A) quieter, and eliminates gear-oil maintenance.

Question 6

What is the difference between geared and gearless traction elevators?

Accepted Answer

Geared machines use a worm/helical gearbox between the motor and sheave, run at 0.63–1.75 m/s, cost less upfront but consume more energy and require gear-oil changes. Gearless PM machines couple the motor directly to the sheave, run at 1.0–8.0 m/s, deliver smoother ride quality (typically ≤15 mg horizontal vibration), and are the current EN 81-20/50 baseline for new mid- and high-rise buildings in Pakistan.

Question 7

When should a project specify a hospital bed lift instead of a passenger lift?

Accepted Answer

Whenever stretcher, wheelchair, or hospital-bed access is required — hospitals, diagnostic imaging centres, dialysis units, senior-living, ICU floors. Bed lifts have 1100–1400 mm clear door opening, 1400–1800 × 2400–2700 mm cabin, ARD, precision leveling within ±3 mm, silent VVVF drive, stainless steel AISI 316 or antimicrobial PVC-coated walls, and independent-service and hospital-priority operation.

Question 8

Where are heavy-duty cargo (freight) lifts typically installed?

Accepted Answer

Textile mills, denim and knitwear units, cold storage, warehouses, food processing plants, automotive assembly lines, packaging plants and multi-storey retail back-of-house. Liftech cargo lifts range 2000–5000 KG with reinforced sling, T89–T125 guide rails, 12–13 mm 8×19 Seale steel wire ropes, bi-parting or vertical roller-shutter doors, load-weighing overload sensors and Class A2 fire-rated landing doors on request.

Commercial Elevators & Advanced Vertical Transportation Engineering in Pakistan

Engineered in Pakistan. Built to move the country upward.

Vertical transportation, engineered for every use case

Passenger Elevators

Home Elevators

Hospital Bed Lifts

Heavy-Duty Cargo Lifts

Commercial High-Rise

Escalators & Walk Movers

Passenger Elevators — Engineered for Safety. Built for Comfort.

The future-ready edge in smart vertical mobility

End-to-end elevator lifecycle services

Design & Engineering

Installation

Modernization

Preventive Maintenance

24/7 Emergency Support

Smart IoT Monitoring

Ready to specify your next elevator?