KONE elevators & parts in Pakistan

Liftech Global Elevators & Escalators can supply, install and service the full KONE range — passenger, MRL, freight, hospital and panoramic elevators — along with genuine spare parts and modernization packages for existing cars.

No. Liftech Global Elevators & Escalators is an independent multi-brand elevator engineering firm. We can work on, supply parts for and modernize KONE equipment, but we do not claim to be an authorized distributor of the brand unless explicitly stated in a signed agreement.

Our head office in Karachi and regional offices in Lahore and Islamabad provide installation, modernization, spare-parts supply and AMC service for KONE equipment nationwide. Call +92 300 0000000 or email info@elevatorescalators.com to request a technical consultation.

KONE systems are engineered to major international lift codes. Every commissioning or modernization performed by Liftech Global Elevators & Escalators is verified against EN 81-20 / EN 81-50 safety standards and Pakistan Engineering Council (PEC) regulatory requirements.

Typical single-car modernization on a KONE platform — controller, drive, door operator and safety gear — is completed in 3 to 6 weeks after site survey and part arrival. Multi-car and high-rise programmes are phased to keep buildings operational.

For high-rise towers above 20 floors, Liftech Global Elevators & Escalators recommends KONE gearless PM traction platforms rated for 2.5–6.0 m/s with destination-dispatch group control. These configurations deliver low waiting intervals under Pakistan's peak-load office and residential profiles while meeting EN 81-20/50 safety architecture.

KONE MRL elevators eliminate the machine-room slab, reducing shaft footprint and construction cost by 6–10%. The compact gearless PM machine sits inside the hoistway headroom, cutting energy consumption by up to 40% versus geared systems — ideal for mid-rise residential and commercial projects across Pakistan.

Hospitals must specify EN 81-70 / EN 81-73 compliant KONE stretcher elevators whenever the building serves inpatient wards, ICUs, or operating theatres. Minimum internal car dimensions of 1100 × 2100 mm accommodate a hospital stretcher plus two attendants, with fire-service and evacuation modes mandatory.

KONE freight elevators are engineered from 1000 kg up to 5000 kg (Class A/B/C loading per EN 81-20) with reinforced platforms, roller guides and heavy-duty door operators. Liftech Global Elevators & Escalators sizes the machine, ropes and safety gear against the building's actual duty cycle before commissioning.

Hospitality, retail malls and corporate atriums in Karachi, Lahore and Islamabad specify KONE panoramic elevators with laminated glass cabins and structural glass shafts. Ratings of 630–1600 kg at 1.0–2.5 m/s are common; wind-load and thermal-expansion calculations are validated during site survey.

Yes. Liftech Global Elevators & Escalators can supply and install KONE home lifts rated 250–450 kg at 0.3–1.0 m/s, with reduced pit and headroom variants suited to existing villas in DHA, Bahria Town and F-sector Islamabad — commissioned to EN 81-41 / EN 81-70 accessibility requirements.

KONE escalators and moving walks are engineered to EN 115-1 / ISO 8100-30, with 30° / 35° incline options, step widths of 600–1000 mm and speeds of 0.5–0.75 m/s. Liftech Global Elevators & Escalators handles supply, structural coordination, commissioning and AMC for retail, airport and metro applications.