Schmitt + Sohn Elevators elevators & parts in Pakistan

Liftech Global Elevators & Escalators can supply, install and service the full Schmitt + Sohn Elevators range — passenger, MRL, freight, hospital and panoramic elevators — along with genuine spare parts and modernization packages for existing cars.

No. Liftech Global Elevators & Escalators is an independent multi-brand elevator engineering firm. We can work on, supply parts for and modernize Schmitt + Sohn Elevators equipment, but we do not claim to be an authorized distributor of the brand unless explicitly stated in a signed agreement.

Our head office in Karachi and regional offices in Lahore and Islamabad provide installation, modernization, spare-parts supply and AMC service for Schmitt + Sohn Elevators equipment nationwide. Call +92 300 0000000 or email info@elevatorescalators.com to request a technical consultation.

Schmitt + Sohn Elevators systems are engineered to major international lift codes. Every commissioning or modernization performed by Liftech Global Elevators & Escalators is verified against EN 81-20 / EN 81-50 safety standards and Pakistan Engineering Council (PEC) regulatory requirements.

Typical single-car modernization on a Schmitt + Sohn Elevators platform — controller, drive, door operator and safety gear — is completed in 3 to 6 weeks after site survey and part arrival. Multi-car and high-rise programmes are phased to keep buildings operational.

For high-rise towers above 20 floors, Liftech Global Elevators & Escalators recommends Schmitt + Sohn Elevators gearless PM traction platforms rated for 2.5–6.0 m/s with destination-dispatch group control. These configurations deliver low waiting intervals under Pakistan's peak-load office and residential profiles while meeting EN 81-20/50 safety architecture.

Schmitt + Sohn Elevators MRL elevators eliminate the machine-room slab, reducing shaft footprint and construction cost by 6–10%. The compact gearless PM machine sits inside the hoistway headroom, cutting energy consumption by up to 40% versus geared systems — ideal for mid-rise residential and commercial projects across Pakistan.

Hospitals must specify EN 81-70 / EN 81-73 compliant Schmitt + Sohn Elevators stretcher elevators whenever the building serves inpatient wards, ICUs, or operating theatres. Minimum internal car dimensions of 1100 × 2100 mm accommodate a hospital stretcher plus two attendants, with fire-service and evacuation modes mandatory.

Schmitt + Sohn Elevators freight elevators are engineered from 1000 kg up to 5000 kg (Class A/B/C loading per EN 81-20) with reinforced platforms, roller guides and heavy-duty door operators. Liftech Global Elevators & Escalators sizes the machine, ropes and safety gear against the building's actual duty cycle before commissioning.

Hospitality, retail malls and corporate atriums in Karachi, Lahore and Islamabad specify Schmitt + Sohn Elevators panoramic elevators with laminated glass cabins and structural glass shafts. Ratings of 630–1600 kg at 1.0–2.5 m/s are common; wind-load and thermal-expansion calculations are validated during site survey.

Yes. Liftech Global Elevators & Escalators can supply and install Schmitt + Sohn Elevators home lifts rated 250–450 kg at 0.3–1.0 m/s, with reduced pit and headroom variants suited to existing villas in DHA, Bahria Town and F-sector Islamabad — commissioned to EN 81-41 / EN 81-70 accessibility requirements.

Schmitt + Sohn Elevators escalators and moving walks are engineered to EN 115-1 / ISO 8100-30, with 30° / 35° incline options, step widths of 600–1000 mm and speeds of 0.5–0.75 m/s. Liftech Global Elevators & Escalators handles supply, structural coordination, commissioning and AMC for retail, airport and metro applications.