Component & Controller Manufacturers · Japan
Yaskawa Electric elevators & parts in Pakistan
Japanese pioneer of the AC servo drive — L1000A and A1000 series elevator-dedicated inverters known for ride-quality tuning, regenerative operation and long service life.
About Yaskawa Electric
Japanese pioneer of the AC servo drive — L1000A and A1000 series elevator-dedicated inverters known for ride-quality tuning, regenerative operation and long service life.
Liftech Global Elevators & Escalators works on Yaskawa Electric equipment across passenger, commercial and industrial buildings in Karachi, Lahore and Islamabad. Our engineering team supplies genuine parts, integrates Yaskawa Electric l1000a / a1000 elevator-dedicated ac drives into new installations, and modernizes existing cars while maintaining full compliance with EN 81-20 / EN 81-50 and Pakistan Engineering Council (PEC) requirements.
Yaskawa Electric component categories we work on
Elevator controllers
Integrated drive-and-control cabinets
VVVF traction drives
Closed-loop PM synchronous & induction
Gearless PM traction machines
MRL and high-rise ready
Absolute rotary encoders
EnDat / SinCos position feedback
Door operators
VVVF door drives & landing components
Cabin fixtures & COP/LOP
Serial-communication car networks
What Liftech Global Elevators & Escalators delivers
- Genuine spare parts & controller boards sourced through Liftech Global Elevators & Escalators.
- Firmware parameterisation, commissioning and closed-loop tuning by certified elevator engineers.
- Retrofit into existing Otis, Schindler, KONE, TKE, Mitsubishi, Hitachi and Fujitec slings.
- EN 81-20/50 and PEC-compliant testing after every drive or controller replacement.
Direct line · Karachi · Lahore · Islamabad
Get a technical consultation for Yaskawa Electric in Pakistan
Share your project scope and a Liftech engineer will respond with an engineered proposal — new installation, spare parts or modernization retrofit on Yaskawa Electric equipment.
Frequently asked questions about Yaskawa Electric
Q.What Yaskawa Electric products and parts can Liftech Global Elevators & Escalators supply?
Liftech Global Elevators & Escalators can source, configure and commission Yaskawa Electric l1000a / a1000 elevator-dedicated ac drives — including replacement boards, drive units, encoders and firmware — for new installations and modernization across Karachi, Lahore and Islamabad.
Q.Is Liftech Global Elevators & Escalators an authorized distributor of Yaskawa Electric?
No. Liftech Global Elevators & Escalators is an independent multi-brand elevator engineering firm. We can work on, supply parts for and modernize Yaskawa Electric equipment, but we do not claim to be an authorized distributor of the brand unless explicitly stated in a signed agreement.
Q.Where can I get Yaskawa Electric elevator service in Pakistan?
Our head office in Karachi and regional offices in Lahore and Islamabad provide installation, modernization, spare-parts supply and AMC service for Yaskawa Electric equipment nationwide. Call +92 300 0000000 or email info@elevatorescalators.com to request a technical consultation.
Q.Does Yaskawa Electric equipment comply with EN 81-20/50 and PEC requirements?
Yaskawa Electric systems are engineered to major international lift codes. Every commissioning or modernization performed by Liftech Global Elevators & Escalators is verified against EN 81-20 / EN 81-50 safety standards and Pakistan Engineering Council (PEC) regulatory requirements.
Q.How long does a Yaskawa Electric modernization project take?
Typical single-car modernization on a Yaskawa Electric platform — controller, drive, door operator and safety gear — is completed in 3 to 6 weeks after site survey and part arrival. Multi-car and high-rise programmes are phased to keep buildings operational.
Q.Which elevator controllers from Yaskawa Electric are compatible with existing Otis, KONE, Schindler and Mitsubishi installations?
Yaskawa Electric integrated elevator controllers (serial CANopen-Lift / DCP-04 architectures) can retrofit into legacy Otis, KONE, Schindler, TKE and Mitsubishi slings. Liftech Global Elevators & Escalators re-wires the traveling cable, re-parameterises the drive and re-certifies the safety chain to EN 81-20/50 before hand-over.
Q.Why specify an Yaskawa Electric VVVF traction drive for PM synchronous gearless machines?
Yaskawa Electric closed-loop VVVF drives deliver ±0.05 mm/s speed regulation with SinCos / EnDat encoder feedback, essential for smooth stopping accuracy under ±3 mm. This eliminates re-levelling, extends rope life and reduces motor heat losses on gearless PM machines by up to 30%.
Q.How is an Yaskawa Electric gearless PM traction machine sized for a given elevator duty?
Liftech engineers select the Yaskawa Electric PM machine using rated load, travel, speed, roping ratio (1:1 or 2:1) and starts-per-hour. The chosen machine's static/dynamic torque and duty-cycle (S3 40%–60%) must exceed the calculated demand with a safety margin, per EN 81-20 §5.9.
Q.When is an absolute rotary encoder from Yaskawa Electric required instead of an incremental encoder?
Absolute EnDat / SinCos encoders from Yaskawa Electric are mandatory on PM synchronous gearless machines because the drive needs rotor-position information from power-up — without homing. They are also required for UCM (Unintended Car Movement) protection under EN 81-20 §5.6.7.
Q.Where are Yaskawa Electric door operators and landing components typically installed in modernization projects?
Yaskawa Electric VVVF door operators mount on the car-top header and drive both car and landing panels through a coupler. Liftech Global Elevators & Escalators retrofits Yaskawa Electric operators onto existing sills in Karachi, Lahore and Islamabad, tuning close/open profiles to EN 81-20 kinetic-energy limits (≤ 10 J).
Q.How do Yaskawa Electric cabin fixtures, COP and LOP integrate with a serial car network?
Yaskawa Electric COP/LOP panels communicate with the controller over CANopen-Lift or proprietary serial buses, reducing traveling-cable cores from 40+ down to 8. This lowers installation cost, improves diagnostics and enables features such as destination dispatch and remote fault reporting.
Q.Can Yaskawa Electric components be supplied with EN 81-20 / EN 81-50 type-examination certificates?
Yes. Liftech Global Elevators & Escalators sources Yaskawa Electric safety-critical components (controllers, overspeed governors, safety gears, buffers) with valid EU type-examination certificates and CE declarations, ensuring the modernized car remains compliant during PEC and third-party inspections.