Liftech Global Elevators & Escalators
Design Your Lift

Parts & Components · Rev 2026-01

Genuine elevator parts stocked across Pakistan.

In-stock components and control assemblies for retrofit, modernization and new installations — with OEM certificates, type-test data and batch traceability.

Warehouse · Karachi HQRegional stock · Lahore · IslamabadCertification · CE / EN 81-50 / ISO 9001Warranty · 12 months from commissioning

Parts sub-categories

Browse elevator components by category.

Cabins, doors, guide rails, guide shoes, speed governors, safety gear, buffers, fixtures, traction machines and control systems — each with technical specifications, standards references and engineering FAQs.

Decorative elevator cabin with etched bronze mirror stainless steel wall panels, granite floor and backlit ceiling — Liftech Global
PRT-01

Elevator Cabins

Stainless, hairline, mirror-etched and glass car interiors built to EN 81-20 car-wall strength.

View details
Bronze PVD stainless steel centre-opening elevator landing door set with stone sill in an arched lobby portal — Liftech Global Pakistan
PRT-02

Elevator Doors

Landing and car door sets — centre-opening, side-opening and telescopic, with E120 fire ratings.

View details
Torin Drive GTW9A gearless permanent-magnet elevator traction machine with twin DC brakes
PRT-03

Elevator Traction Machines & Drives

Gearless PM machines, geared machines and VVVF inverter drives from 320 kg to 5 000 kg.

View details
Monarch NICE 3000+ integrated elevator control cabinet with VVVF drive and safety relays
PRT-04

Elevator Control Systems

Monarch NICE 3000+, Yaskawa L1000A, Monadrive MCK and Fujidrive control panels with ARD and group dispatch.

View details
Machined T-profile elevator guide rails and formed hollow counterweight rails stacked on pallets for lift installations in Karachi, Lahore and Islamabad
PRT-05

Elevator Guide Rails

T-profile machined and cold-drawn rails, brackets and fishplates aligned to ±0.5 mm plumb.

View details
Elevator guide shoe assembly with sprung jaw, red polyurethane liner and bolted mounting plate for car sling and counterweight frames
PRT-06

Elevator Guide Shoes

Sliding and roller guide shoes for car, counterweight and safety-gear frames — smooth, quiet running.

View details
DZ-XS24B elevator overspeed governor with sealed calibration plate and spring-loaded rope grip, supplied and trip-tested to EN 81-20 in Karachi, Lahore and Islamabad
PRT-07

Elevator Safety Speed Governors

Overspeed governors with electrical trip and mechanical rope grip, calibrated and sealed to EN 81-20.

View details
Matched pair of progressive elevator safety gear blocks with roller wedges, damping springs and mounting fittings, type-tested to EN 81-50 and supplied in Karachi, Lahore and Islamabad
PRT-08

Elevator Safety Brakes & Safety Gear

Instantaneous and progressive safety gear, plus machine brakes and rope-brake UCM protection.

View details
Aodepu OH-80 oil hydraulic elevator buffer with return spring, plunger-return switch and EN 81-50 qualification certificate, supplied by Liftech Global in Karachi Pakistan
PRT-09

Elevator Safety Buffers

Polyurethane, spring and oil-hydraulic buffers sized to rated speed and total mass.

View details
Stainless steel elevator car operating panel with red dot-matrix display beside two landing operating panels with hall lanterns
PRT-10

Elevator Fixtures — COP, LOP & Displays

Car operating panels, landing pushes, hall lanterns and dot-matrix or TFT position indicators.

View details

Featured Series · TORIN DRIVE / MONADRIVE

Torin Drive GTW gearless traction machines — full range in stock.

Liftech Global Elevators & Escalators can work on and provide parts for the CE-certified Torin Drive GTW series and Monadrive PMS gearless traction machines across Pakistan. Every unit is a permanent-magnet synchronous (PMSM) gearless machine built for machine-room-less (MRL) passenger, cargo, hospital and home elevator applications — 380 V, 32-pole, class F insulation, IP41 ingress protection, S5 (40 %) duty rating.

  • · Voltage · 380 V AC · 3-phase
  • · Pole count · 32 · PMSM
  • · Duty rating · S5 (40 %)
  • · Insulation · Class F
  • · Ingress · IP41
  • · Brake · redundant dual-caliper DC110 V
  • · Encoder · Heidenhain ECN 413 sin/cos
  • · Compliance · CE · EN 81-20/50 · EN 81-1 §12.5
Monadrive PMS gearless traction machine — permanent-magnet synchronous elevator motor supplied by Liftech Pakistan
Monadrive · PMS gearless traction machine · Karachi warehouse
Torin Drive GTW7A gearless elevator traction machine — 2000 kg static load, 190 kg weight, FZD10 brakeTorin GTW7A

Elevator Traction Machine

Torin Drive GTW7A

Susp.
2:1
Brake
FZD10 · DC110V 2×0.84A (2×1.46A)
Load
2 000 kg
Weight
190 kg

Home lifts · villa · 320–450 KG cabins

Torin Drive GTW9S gearless elevator traction machine with FZD12A brake, 3000 kg static load, 315 kg weightTorin GTW9S

Elevator Traction Machine

Torin Drive GTW9S

Susp.
2:1 / 1:1
Brake
FZD12A · DC110V 2×1.28A
Load
3 000 kg
Weight
315 kg

Passenger lifts · 450–800 KG cabins

Torin Drive GTW9A gearless elevator traction machine with FZD12C brake, 3500 kg static load, 350 kg weightTorin GTW9A

Elevator Traction Machine

Torin Drive GTW9A

Susp.
2:1 / 1:1
Brake
FZD12C · DC110V 2×1.5A
Load
3 500 kg
Weight
350 kg

Passenger & commercial · 630–1000 KG cabins

Torin Drive GTW5A gearless elevator traction machine with PZD220A brake, 6000 kg static load, 820 kg weightTorin GTW5A

Elevator Traction Machine

Torin Drive GTW5A

Susp.
2:1
Brake
PZD220A · DC110V 2×1.1A
Load
6 000 kg
Weight
820 kg

Hospital · cargo · 1275–2000 KG cabins

Torin Drive GTW10X gearless elevator traction machine with FZD14 brake, 6000 kg static load, 580 kg weightTorin GTW10X

Elevator Traction Machine

Torin Drive GTW10X

Susp.
2:1 / 4:1 / 1:1
Brake
FZD14 · DC110V 2×2A
Load
6 000 kg
Weight
580 kg

Passenger · MRL · 1000–1600 KG cabins

Torin Drive GTW10XL gearless elevator traction machine with FZD15 brake, 6000 kg static load, 720 kg weightTorin GTW10XL

Elevator Traction Machine

Torin Drive GTW10XL

Susp.
2:1 / 1:1
Brake
FZD15 · DC110V 2×2.2A
Load
6 000 kg
Weight
720 kg

Passenger & cargo · 1275–1800 KG cabins

Torin Drive GTW12 gearless elevator traction machine with FZD15 brake, 8000 kg static load, 910 kg weightTorin GTW12

Elevator Traction Machine

Torin Drive GTW12

Susp.
2:1 / 1:1
Brake
FZD15 · DC110V 2×2.2A
Load
8 000 kg
Weight
910 kg

Heavy cargo · hospital bed lifts · up to 2500 KG

Torin Drive GTW series · technical datasheet

Common ratings: 380 V · 32-pole · S5 (40 %) · Class F · IP41 · CE certified.

7 models
ModelSuspensionBrakeMax static loadMachine weightTypical application
GTW7A2:1FZD10 · DC110V 2×0.84A (2×1.46A)2 000 kg190 kgHome lifts · villa · 320–450 KG cabins
GTW9S2:1 / 1:1FZD12A · DC110V 2×1.28A3 000 kg315 kgPassenger lifts · 450–800 KG cabins
GTW9A2:1 / 1:1FZD12C · DC110V 2×1.5A3 500 kg350 kgPassenger & commercial · 630–1000 KG cabins
GTW5A2:1PZD220A · DC110V 2×1.1A6 000 kg820 kgHospital · cargo · 1275–2000 KG cabins
GTW10X2:1 / 4:1 / 1:1FZD14 · DC110V 2×2A6 000 kg580 kgPassenger · MRL · 1000–1600 KG cabins
GTW10XL2:1 / 1:1FZD15 · DC110V 2×2.2A6 000 kg720 kgPassenger & cargo · 1275–1800 KG cabins
GTW122:1 / 1:1FZD15 · DC110V 2×2.2A8 000 kg910 kgHeavy cargo · hospital bed lifts · up to 2500 KG
Studio reference photo: Torin Drive GTW9S gearless traction machine. All GTW machines are supplied with type-test certificate, factory test report and 12-month commissioning warranty across Karachi, Lahore and Islamabad.

Featured Series · MONARCH by INOVANCE — NICE3000new

Monarch NICE3000new integrated elevator controller — serial technology, up to 4 m/s.

Liftech Global Elevators & Escalators can work on and provide parts for the Monarch NICE3000new integrated lift controller — the latest-generation, EN 81-20/50 safety-certified integrated drive-and-controller from Monarch (an Inovance company) with over 2,000,000 installations worldwide. The NICE3000new combines the VVVF drive, logic controller, safety circuit and CANbus serial network into a single compact cabinet, supporting both PM gearless and asynchronous geared traction machines up to 4 m/s.

Every NICE3000new package provided by Liftech in Karachi, Lahore and Islamabad is delivered with type-test certificate, factory routine-test report, EN 81-20/50 declaration of conformity, TÜV SÜD & CE marks, 12-month warranty and commissioning support from our field engineers.

SEO / AEO focus keywords: Monarch NICE3000 new controller Pakistan, Inovance elevator controller Karachi, NICE3000+ integrated drive Lahore, EN 81-20 certified lift controller Islamabad, MRL E-Package SIL3 contactless, Monarch BST controller parts and service Pakistan.

Monarch NICE3000new integrated elevator controller — EN 81-20/50 safety certified serial technology solution supplied by Liftech Pakistan
Monarch NICE3000new · integrated solution for elevators · serial technology

Integrated solution — up to 4 m/s

EN 81-20 safety certified · TÜV SÜD · CE

  • ◼ Supports PM gearless and asynchronous geared traction machines
  • ◼ "Direct To Floor" (DTF) landing technology — smooth ride, minimum dwell time
  • ◼ Anti-rollback without external load cell (gearless machines)
  • ◼ Pre-torque function (analog load-cell input for geared machines)
  • ◼ Static auto-tuning for synchronous / asynchronous motors (no brake opening)
  • ◼ Rapid commissioning step-through sequence · flexible programmable I/O
  • ◼ Conformal-coated PCBs — humidity & dust protection
  • ◼ Ambient operation up to 45 °C avg · wide voltage range 323–528 V AC

Feature highlights & connectivity

Serial technology · CANbus · WiFi firmware update

  • ◼ Standard 48 floors, full-collective operation (full serial connection)
  • ◼ Duplex onboard group control (CANbus serial communication)
  • ◼ Automatic door control mode · selectable fireman operation (EN 81-72)
  • ◼ Supports 1-ph 220 V AC UPS (quasi & sine-wave) — ARD rescue with light-load direction search
  • ◼ Comprehensive trip diagnostics & event log
  • ◼ Hot-pluggable LCD/LED keypads: MDKE (no memory), MDKE6 (memory), MDKE9 (multilingual — EN / TR / IT / RU)
  • ◼ New WiFi firmware-update module + mobile app & Windows 7/10 PC-Tools
  • ◼ MCTC-SCB-A3 optional door-bridging board (EN 81-20 SIL certified)
Monarch NICE3000new encoder cards MCTC-PG-E / E6 / F1 / D / A2 for PM gearless and induction geared elevator traction machines — supported by Liftech Pakistan
Encoder cards · MCTC-PG-E / E6 / F1 / D / A2 · SinCos ERN1387 · EnDat 2.0/2.1 · incremental
Monarch NICE3000new general connection diagram — 48-floor full-collective standard with NICE900 door drive and MCTC car-top board, EN 81-20/50 certified
General connection diagram · NICE900 door drive · MCTC-CTB-A2 car-top board · COP / LOP / hall lantern

Monarch NICE3000new · technical datasheet

Extracted from Monarch (Inovance) NICE3000new integrated-solution brochure — EN 81-20/50, TÜV SÜD, CE certified.

14 parameters
ParameterSpecification
Product familyNICE3000new integrated controller (VVVF drive + logic + safety)
Max travel speedUp to 4.0 m/s
Max floors served48 floors, full collective (full serial)
Machine supportPM gearless (PMSM) · asynchronous geared (induction)
Landing technologyDirect-To-Floor (DTF) · smooth ride · anti-rollback (no load cell)
Group / duplexOnboard duplex group control via CANbus
Safety certificationEN 81-20 · EN 81-50 · TÜV SÜD · CE · SIL3 (MRL E-Package contactless)
Door driveCompanion NICE900 door drive (kinetic-energy limit · nudging 150 Nm / 10 J)
Encoder supportMCTC-PG-E / E6 (SinCos ERN1387) · PG-F1 (EnDat 2.0/2.1 ECN1313/413) · PG-D (incremental UVW) · PG-A2 (single-ended 12 V)
Voltage range323–528 V AC (wide input) · 3-phase 380 V nominal
Ambient45 °C avg operating · conformal-coated PCBs (humidity + dust)
Rescue / ARD1-ph 220 V AC UPS (quasi & sine wave) · intelligent light-load direction search
Fireman / evacuationSelectable fireman operation (EN 81-72 compatible)
HMI / toolsHot-pluggable MDKE / MDKE6 / MDKE9 keypads · WiFi firmware update · mobile app · PC-Tools (Win 7/10)
Monarch MRL E-Package contactless SIL3 — NICE series MRL cabinet, COP, LOP, door controller, inspection box and complete cable harness for machine-room-less elevators
Monarch MRL E-Package · contactless SIL3 · complete machine-room-less kit
Monarch BST (Inovance) global installed base — over 2,000,000 NICE integrated elevator controller installations worldwide, including Pakistan
Monarch BST · > 2,000,000 NICE integrated installations worldwide
Products, parts and commissioning support in Pakistan. Liftech Global Elevators & Escalators can provide the complete Monarch NICE3000new line — main control cabinet, MCTC-CTB-A2 car-top board, MCTC-CCB-A car-call board, MCTC-SCB-A3 door-bridging board, NICE900 door drive, MDKE / MDKE6 / MDKE9 keypads and the full range of PG encoder cards — for new installations, modernisation and replacement across Karachi (head office), Lahore and Islamabad. Our field engineers deliver on-site commissioning, parameter set-up, DTF tuning, ARD integration and EN 81-20/50 handover documentation. Ask our parts desk for a same-day quotation on any NICE3000new spare or complete MRL E-Package.
Monadrive MONA series — permanent-magnet synchronous gearless elevator traction machines supplied by Liftech in Pakistan (Karachi, Lahore, Islamabad)
Monadrive · MONA / MCK PMS gearless series · products and parts available in Pakistan

Featured Series · MONADRIVE

Monadrive PMS gearless traction machines — full MONA & MCK range.

Liftech Global Elevators & Escalators supplies the complete Monadrive permanent-magnet synchronous (PMSM) gearless traction-machine catalogue — from the compact MONA150 / MONA200 home-lift class up to the heavy-duty MCK500-E hospital and cargo class rated 10 000 kg static shaft load. Every unit is engineered for machine-room-less (MRL) elevators, delivers low-noise ride quality and is stocked with brake, encoder and hand-wheel emergency-release accessories in Karachi, Lahore and Islamabad.

  • · Voltage · 220 V / 380 V AC · 3-phase
  • · Technology · PMSM · gearless
  • · Insulation · Class F · IP41
  • · Brake · EMM600 / EMK series dual-caliper DC
  • · Duty · S5-25 % (MONA) · S5-40 % (MCK)
  • · Starts per hour · up to 240 st/h
  • · Rated load · 320 kg → 2 500 kg
  • · Compliance · CE · EN 81-20 / 50 · GB 7588

SEO / AEO focus keywords: Monadrive elevator traction machine Pakistan, MONA200 gearless motor Karachi, MCK300 PMS gearless machine Lahore, MCK500 hospital lift motor Islamabad, MRL gearless machine supplier Pakistan, EN 81-20 gearless traction machine.

Monadrive MONA150 permanent-magnet synchronous gearless elevator traction machine — 320–630 kg, 2500 kg static load, 85 kg weight, IP41Monadrive MONA150MONA series

PMS Gearless Traction Machine

Monadrive MONA150

Voltage
220 V / 380 V
Load
320–630 kg
Speed
0.4–1.0 m/s
Sheave
Ø120 / Ø150 / Ø160 mm
Static
2 500 kg
Ratio
2:1
Duty
S5-25 % · 180 st/h
Weight
85 kg
Brake
EMM600 · DC110 V 2×1.2 A (2×0.8 A opt.)

Home lifts · villa · low-rise passenger 320–450 KG

Monadrive MONA200-D compact PMS gearless elevator traction machine — 320–450 kg, Ø200/Ø240 sheave, 95 kg weightMonadrive MONA200-DMONA series

PMS Gearless Traction Machine

Monadrive MONA200-D

Voltage
220 V / 380 V
Load
320–450 kg
Speed
0.4–1.0 m/s
Sheave
Ø200 / Ø240 mm
Static
2 500 kg
Ratio
2:1
Duty
S5-25 %
Weight
95 kg
Brake
EMM600 · DC110 V / 2.4 A

Home & villa lifts · shaft-top MRL · quiet-run

Monadrive MONA200 blue permanent-magnet synchronous gearless traction machine — 320–800 kg, 0.4–1.75 m/s, 180 kg weightMonadrive MONA200MONA series

PMS Gearless Traction Machine

Monadrive MONA200

Voltage
220 V / 380 V
Load
320–800 kg
Speed
0.4–1.75 m/s
Sheave
Ø200 / Ø240 / Ø320 mm
Static
2 500 kg
Ratio
1:1 / 2:1
Duty
S5-25 %
Weight
180 kg
Brake
EMM600 · DC110 V / 2.5 A

Mid-rise passenger 450–800 KG · residential · commercial

Monadrive MONA200 grey PMS gearless traction machine — 400–800 kg, Ø210/Ø240/Ø320 sheave, 1.0–1.6 m/sMonadrive MONA200 (grey)MONA series

PMS Gearless Traction Machine

Monadrive MONA200 (grey)

Voltage
220 V / 380 V
Load
400–800 kg
Speed
1.0–1.6 m/s
Sheave
Ø210 / Ø240 / Ø320 mm
Static
2 500 kg
Ratio
2:1
Duty
S5-25 % · 180 st/h
Weight
180 kg
Brake
EMM600 · DC110 V 2×1.2 A (DC207 V 2×0.8 A opt.)

High-speed passenger · office · mid-rise MRL

Monadrive MCK200-S rear-handwheel PMS gearless elevator traction machine — 630–1150 kg, 3000 kg static load, 252 kgMonadrive MCK200-SMCK series

PMS Gearless Traction Machine

Monadrive MCK200-S

Voltage
380 V
Load
630–1150 kg
Speed
1.0–2.5 m/s
Sheave
Ø400 / Ø450 mm
Static
3 000 kg
Ratio
2:1
Duty
S5-40 %
Weight
252 kg
Brake
EMK9K · DC110 V 2×1.3 A

Passenger & office lifts · rear-handwheel manual release

Monadrive MCK200-E PMS gearless elevator traction machine — 630–1250 kg, 3500 kg static load, 290 kg weightMonadrive MCK200-EMCK series

PMS Gearless Traction Machine

Monadrive MCK200-E

Voltage
380 V
Load
630–1250 kg
Speed
1.0–2.5 m/s
Sheave
Ø400 / Ø450 mm
Static
3 500 kg
Ratio
1:1 / 2:1
Duty
S5-40 % · 240 st/h
Weight
290 kg
Brake
EMK9K · DC110 V 2×1.3 A (DC207 V 2×0.8 A opt.)

Passenger 8–20 stops · residential towers · commercial

Monadrive MCK300-E PMS gearless elevator traction machine — 1250–1600 kg, 6000 kg static load, 450 kg weightMonadrive MCK300-EMCK series

PMS Gearless Traction Machine

Monadrive MCK300-E

Voltage
380 V
Load
1250–1600 kg
Speed
1.0–2.5 m/s
Sheave
Ø400 / Ø450 / Ø520 mm
Static
6 000 kg
Ratio
1:1 / 2:1
Duty
S5-40 % · 240 st/h
Weight
450 kg
Brake
EMK12K · DC110 V 2×1.6 A (DC207 V 2×1.3 A opt.)

Hospital · hotel · high-traffic passenger 16–1600 KG

Monadrive MCK450 PMS gearless elevator traction machine — 1600–2500 kg, 7500 kg static load, 530 kg weightMonadrive MCK450MCK series

PMS Gearless Traction Machine

Monadrive MCK450

Voltage
380 V
Load
1600–2500 kg
Speed
1.0–2.5 m/s
Sheave
Ø450 / Ø480 mm
Static
7 500 kg
Ratio
1:1 / 2:1
Duty
S5-40 % · 240 st/h
Weight
530 kg
Brake
EMK18K · DC110 V 2×2.6 A (DC207 V 2×1.85 A opt.)

Heavy passenger · hospital bed lifts · cargo

Monadrive MCK500-E heavy-duty PMS gearless elevator traction machine — 1600–2500 kg, 10 000 kg static load, 740 kg weightMonadrive MCK500-EMCK series

PMS Gearless Traction Machine

Monadrive MCK500-E

Voltage
380 V
Load
1600–2500 kg
Speed
1.0–2.5 m/s
Sheave
Ø480 / Ø520 / Ø650 mm
Static
10 000 kg
Ratio
1:1 / 2:1
Duty
S5-40 % · 240 st/h
Weight
740 kg
Brake
EMK18K · DC110 V 2×2.6 A (DC207 V 2×1.85 A opt.)

Heavy cargo · hospital · goods lifts up to 2500 KG

Monadrive MONA & MCK series · technical datasheet

Common ratings: 220/380 V · PMSM · Class F · IP41 · CE · EN 81-20/50. Data extracted from Monadrive factory plates.

9 models
ModelVoltageRated loadSheaveStatic loadRatioSpeedDutyWeightBrake
MONA150220 V / 380 V320–630 kgØ120 / Ø150 / Ø160 mm2 500 kg2:10.4–1.0 m/sS5-25 % · 180 st/h85 kgEMM600 · DC110 V 2×1.2 A (2×0.8 A opt.)
MONA200-D220 V / 380 V320–450 kgØ200 / Ø240 mm2 500 kg2:10.4–1.0 m/sS5-25 %95 kgEMM600 · DC110 V / 2.4 A
MONA200220 V / 380 V320–800 kgØ200 / Ø240 / Ø320 mm2 500 kg1:1 / 2:10.4–1.75 m/sS5-25 %180 kgEMM600 · DC110 V / 2.5 A
MONA200 (grey)220 V / 380 V400–800 kgØ210 / Ø240 / Ø320 mm2 500 kg2:11.0–1.6 m/sS5-25 % · 180 st/h180 kgEMM600 · DC110 V 2×1.2 A (DC207 V 2×0.8 A opt.)
MCK200-S380 V630–1150 kgØ400 / Ø450 mm3 000 kg2:11.0–2.5 m/sS5-40 %252 kgEMK9K · DC110 V 2×1.3 A
MCK200-E380 V630–1250 kgØ400 / Ø450 mm3 500 kg1:1 / 2:11.0–2.5 m/sS5-40 % · 240 st/h290 kgEMK9K · DC110 V 2×1.3 A (DC207 V 2×0.8 A opt.)
MCK300-E380 V1250–1600 kgØ400 / Ø450 / Ø520 mm6 000 kg1:1 / 2:11.0–2.5 m/sS5-40 % · 240 st/h450 kgEMK12K · DC110 V 2×1.6 A (DC207 V 2×1.3 A opt.)
MCK450380 V1600–2500 kgØ450 / Ø480 mm7 500 kg1:1 / 2:11.0–2.5 m/sS5-40 % · 240 st/h530 kgEMK18K · DC110 V 2×2.6 A (DC207 V 2×1.85 A opt.)
MCK500-E380 V1600–2500 kgØ480 / Ø520 / Ø650 mm10 000 kg1:1 / 2:11.0–2.5 m/sS5-40 % · 240 st/h740 kgEMK18K · DC110 V 2×2.6 A (DC207 V 2×1.85 A opt.)
All Monadrive MONA and MCK gearless machines are supplied with type-test certificate, factory routine-test report and 12-month commissioning warranty. Stocked at Liftech Karachi HQ; delivered next-day to Lahore and Islamabad. Ideal replacement motor for modernization of Otis, Schindler, KONE, Fuji, Mitsubishi and Hyundai passenger and hospital elevators.

Featured Series · FUJIDRIVE — Freedom To Move

Fujidrive FD & FDR gearless traction machines — products and parts available in Pakistan.

Liftech Global Elevators & Escalators can work on and provide parts for the complete Fujidrive permanent-magnet synchronous (PMSM) gearless traction-machine range — FD240B for 6-floor home lifts, FDR320A for mid-rise passenger elevators, FD320 for buildings up to 20 floors and FDR400A for high-traffic commercial towers. Every unit is CE-certified, machine-room-less (MRL) ready, delivers low-noise ride quality and is stocked with brake, encoder and hand-wheel emergency-release accessories in Karachi, Lahore and Islamabad.

  • · Technology · PMSM · gearless
  • · Suspension · 2:1
  • · Insulation · Class F · IP41
  • · Brake · DC110 V dual-caliper
  • · Rated load · 320 kg → 1 150 kg
  • · Speed · 0.4 → 2.0 m/s
  • · Static shaft load · 2 000 → 5 000 kg
  • · Compliance · CE · EN 81-20 / 50 · GB 7588

SEO / AEO focus keywords: Fujidrive elevator traction machine Pakistan, FDR320A gearless motor Karachi, FD320 20-floor elevator machine Lahore, FD240B home lift motor Islamabad, MRL PMSM gearless supplier Pakistan, EN 81-20 Fujidrive traction machine.

Fujidrive — Freedom To Move — permanent-magnet synchronous gearless elevator traction machines supplied by Liftech Pakistan (Karachi, Lahore, Islamabad)
Fujidrive · FD / FDR gearless series · products and parts available in Pakistan
Fujidrive FD240B 2:1 gearless traction machine — 320–630 kg, 0.4–1.0 m/s, 2500 kg static load, 8 pole pairs, IP41, for 6-floor buildingsFujidrive

Gearless Traction Machine

FD240B (2:1)

Load
320–630 kg
Speed
0.4–1.0 m/s
Susp.
2:1
Static
2 500 kg
Poles
8
IP
IP41
Ins.
Class F
Brake
DC110 V · 1.23 A

Home & villa lifts · low-rise up to 6 floors

Fujidrive FDR320A 2:1 gearless traction machine — 320–630 kg, 0.4–1.75 m/s, 2000 kg static load, 32 pole pairs, IP41Fujidrive

Gearless Traction Machine

FDR320A (2:1)

Load
320–630 kg
Speed
0.4–1.75 m/s
Susp.
2:1
Static
2 000 kg
Poles
32
IP
IP41
Ins.
Class F
Brake
DC110 V · 2×0.84 A (2×1.46 A)

Passenger lifts · mid-rise residential · MRL

Fujidrive FD320 2:1 gearless traction machine — 630–1050 kg, 0.63–2.0 m/s, 5000 kg static load, 12 pole pairs, IP41, up to 20-floor buildingsFujidrive

Gearless Traction Machine

FD320 (2:1)

Load
630–1050 kg
Speed
0.63–2.0 m/s
Susp.
2:1
Static
5 000 kg
Poles
12
IP
IP41
Ins.
Class F
Brake
DC110 V · 2×1.48 A

Commercial passenger · buildings up to 20 floors

Fujidrive FDR400A 2:1 gearless traction machine — 630–1150 kg, 1.0–2.0 m/s, 3000 kg static load, 32 pole pairs, IP41Fujidrive

Gearless Traction Machine

FDR400A (2:1)

Load
630–1150 kg
Speed
1.0–2.0 m/s
Susp.
2:1
Static
3 000 kg
Poles
32
IP
IP41
Ins.
Class F
Brake
DC110 V · 2×1.28 A

High-traffic passenger · office towers · hotels

Fujidrive FD & FDR series · technical datasheet

Common ratings: PMSM · gearless · Class F · IP41 · CE · EN 81-20/50. Data extracted from Fujidrive factory plates.

4 models
ModelRated loadSpeedSuspensionStatic loadPole pairsIPInsulationBrake
FD240B (2:1)320–630 kg0.4–1.0 m/s2:12 500 kg8IP41Class FDC110 V · 1.23 A
FDR320A (2:1)320–630 kg0.4–1.75 m/s2:12 000 kg32IP41Class FDC110 V · 2×0.84 A (2×1.46 A)
FD320 (2:1)630–1050 kg0.63–2.0 m/s2:15 000 kg12IP41Class FDC110 V · 2×1.48 A
FDR400A (2:1)630–1150 kg1.0–2.0 m/s2:13 000 kg32IP41Class FDC110 V · 2×1.28 A
All Fujidrive FD and FDR gearless machines are supplied with type-test certificate, factory routine-test report and 12-month commissioning warranty. Stocked at Liftech Karachi HQ; delivered next-day to Lahore and Islamabad. Ideal replacement motor for modernization of Otis, Schindler, KONE, Mitsubishi and Hyundai passenger elevators up to 20-floor commercial buildings.

Parts Gallery · From Liftech Projects

Genuine elevator components, photographed on the job.

Real gearless traction machines, VVVF drives, integrated controllers, IoT gateways and safety components installed by Liftech engineers on passenger, cargo, hospital and home elevator projects across Pakistan.

Italianpro PM synchronous gearless elevator traction machine with brake and sheaveTM-Italianpro-PMSM

Traction machine · Passenger

Italianpro PM synchronous machine

European-built permanent-magnet gearless traction machine specified on Liftech passenger elevator projects across Karachi, Lahore and Islamabad.

  • 630–1275 KG
  • 1.0–1.75 m/s
  • PMSM · gearless
  • Integrated brake
Torin Drive gearless elevator motor rated 4.2 kW, 630 KG capacity, 1.0 m/s speedTM-Torin-GTW

Traction machine · Villa & mid-rise

Torin Drive gearless motor

Torin Drive compact gearless PMSM motor — the standard choice for villa, home and small commercial elevators where shaft space and energy efficiency matter.

  • 4.2 kW
  • 630 KG
  • 1.0 m/s
  • MRL ready
Gearless traction machine installed on machine-beam with governor, buffer springs and steel wire ropesINST-MACHINE

Site engineering

Machine-beam installation

Field installation of a gearless traction unit on structural machine-beam with overspeed governor, counterweight buffers and EN 12385-5 compliant suspension ropes.

  • Structural beam
  • Governor sheave
  • Spring buffers
  • 8×19 Seale rope
Monarch NICE 3000+ integrated elevator controller inside compact control cabinet with contactors and RCCBCTRL-NICE-3000+

Controller · Integrated drive

Monarch NICE 3000+ controller cabinet

Compact Monarch NICE 3000+ integrated drive-and-controller cabinet — the most widely deployed platform on Liftech modernization projects in Pakistan, complete with RCCB protection, phase-reversal detection and inspection/emergency-run panel.

  • Integrated VVVF
  • Closed-loop vector
  • Up to 64 stops
  • 8-car group ready
Elevator safety components: progressive safety gear, overspeed governor, oil buffer and steel wire suspension ropeSAFETY-KIT

Safety · EN 81-20/50

Type-tested safety components

Certified safety chain for every Liftech installation: progressive safety gear, bidirectional overspeed governor, EN 81-50 oil buffer and 8×19 Seale suspension rope — with type-test certificates and batch traceability.

  • Progressive safety gear
  • Overspeed governor
  • Oil buffer
  • Steel wire rope
Ziehl-Abegg ZAtopx gearless PMSM elevator traction machine, front viewTM-ZAtopx

Traction machine · MRL

Ziehl-Abegg ZAtopx gearless machine

Compact permanent-magnet synchronous gearless machine engineered for machine-room-less (MRL) passenger elevators — low noise, high efficiency and modernization-friendly footprint.

  • 630–2000 KG
  • 1.0–2.5 m/s
  • PMSM · gearless
  • Encoder ECN 413
Ziehl-Abegg ZAtop SM132-B gearless elevator machine with brake and sheaveTM-ZAtop-SM132B

Traction machine · Mid-rise

Ziehl-Abegg ZAtop SM132-B

Proven ZAtop SM132-B gearless traction unit for 6–15 stop residential and commercial passenger lifts, with EN 81-20/50 compliant dual-caliper safety brake.

  • Up to 1000 KG
  • 1.0–1.75 m/s
  • Dual-caliper brake
  • Ø240 sheave
Ziehl-Abegg ZAsyn2 SM500 gearless high-capacity elevator traction machineTM-ZAsyn2-SM500

Traction machine · High-rise

Ziehl-Abegg ZAsyn2 SM500

High-capacity gearless machine for hospital, hotel and high-rise applications — supports 2:1 roping, heavy cargo duty and destination-dispatch group control.

  • Up to 2500 KG
  • Up to 4.0 m/s
  • High-rise duty
  • Low-harmonic PMSM
Ziehl-Abegg ZAdyn4 VVVF elevator drive with NewLift FST-2XT controller and Elevision 4.0 IoT gateway in control cabinetCTRL-ZAdyn4-FST2XT

Controller · Drive · IoT

ZAdyn4 + NewLift FST-2XT control cabinet

Fully wired European control cabinet combining a Ziehl-Abegg ZAdyn4 elevator drive, NewLift FST-2XT microprocessor controller and Elevision 4.0 IoT gateway for remote monitoring, predictive maintenance and OTA firmware updates.

  • ZAdyn4 VVVF drive
  • NewLift FST-2XT
  • Elevision 4.0 gateway
  • CAN-bus serial
Ziehl-Abegg ZAsyn gearless machine and ZAdyn drive mounted at the top of an elevator shaft — machine-room-less configurationMRL-ZAsyn-ZAdyn

Machine-room-less system

MRL shaft-top machine + drive

Complete Ziehl-Abegg ZAsyn gearless machine and ZAdyn drive installed at the shaft head — the reference MRL configuration for space-constrained buildings across Pakistan.

  • Shaft-top mount
  • PMSM machine
  • ZAdyn VVVF
  • Steel-belt / rope

Traction Machines & Drives

Gearless PMSM machines and elevator-grade VVVF inverters for new install and modernization.

6 items
Part codeComponentSpecification
TM-ZAtop-SM200Ziehl-Abegg ZAtop SM200 gearless machine630–1275 KG · 1.0–2.5 m/s · 5.5–11 kW · encoder ECN 413
TM-Torin-GTW6Torin GTW6 gearless machine630–1600 KG · 1.0–2.5 m/s · 4–13 kW · brake pair 350 Nm
DRV-Fuji-LM2AFuji Frenic Lift LM2A VVVF inverter5.5 / 7.5 / 11 / 15 / 22 kW · 380 V ±15% · regen option
DRV-Yaskawa-L1000AYaskawa L1000A elevator drive5.5–75 kW · closed-loop vector · integrated brake chopper
REGEN-Fuji-RHCFuji regenerative converterRecovers 20–35% braking energy · THD < 5%
GEAR-MontanariMontanari geared traction machine800–2500 KG · 0.63–1.0 m/s · retrofit-friendly

Controllers & Serial Systems

Serial CAN-bus controllers and group control systems — the backbone of modernization.

5 items
Part codeComponentSpecification
CTRL-NICE-3000+Monarch NICE 3000+ integrated controllerSerial CAN-bus, closed-loop, up to 64 stops, 8 cars group ready
CTRL-NICE-5000Monarch NICE 5000 group / DCS controllerDestination dispatch, BMS handshake, cloud telemetry ready
CTRL-Aybey-ADriveAybey ADrive integrated controllerEuropean integrated drive + controller for MRL
CTRL-ARL-500Aybey ARL-500 controllerClassic modernization workhorse, discrete drive
DOOR-CAN-WitturWittur door controller (Augusta serial)CAN-bus interface, position feedback, closing force limiter

Safety, Rescue & Interlocks

Type-tested safety components with EN 81-50 certificates and batch traceability.

7 items
Part codeComponentSpecification
ARD-1P-5kVAAutomatic Rescue Device 1-phase5 kVA · 24/48 V battery bank · 30 min standby
ARD-3P-15kVAAutomatic Rescue Device 3-phase10–15 kVA · dual battery bank · 60 min standby
GOV-OL-100Overspeed governor Ø200 mmBidirectional, EN 81-20 §5.6.2, type-tested
SG-PROGProgressive safety gear (Adams / Wittur)Load 630–2500 KG · rail T89/T125
BUF-OIL-BlainBlain oil buffer OL seriesStroke matched to speed per EN 81-50 §5.5.3
BUF-PUPolyurethane energy-accumulation bufferSpeeds ≤1.0 m/s, maintenance-free
INT-WitturLanding door interlock (Wittur / Selcom)Monitored contact, force-guided relay compatible

Cabin, Doors & Signalling

Custom cabins fabricated locally with imported operators, glass and TFT signalling.

8 items
Part codeComponentSpecification
CAB-SS316Custom stainless steel cabin (SS 316)Marine-grade for Karachi coastal projects
CAB-SS304Custom stainless steel cabin (SS 304)Hairline / mirror / PVD gold / rose finish
DOOR-CO-2PAutomatic center-opening 2-panel landing doorOP 700 / 800 / 900 / 1000 / 1100 mm
DOOR-SO-4PSide-opening 4-panel telescopic doorOP 1000 / 1200 mm · high-traffic use
DOP-FermatorFermator VVVF door operatorClosing force limiter, encoder position feedback
COP-TFT7TFT 7" COP with Braille tactile buttonsEN 81-70 accessibility, voice announcement
LOP-TFT10TFT 10" landing operating panelHall lantern, arrival gong, direction indicator
PC-3D3D door safety curtain (light-grid photocell)192 beams · IP54 · closing force compliance aid

Ropes, Guides & Structural

Suspension, guides and structural steel — the fundamentals of a safe installation.

8 items
Part codeComponentSpecification
ROPE-8x19-8Steel wire rope 8×19 Seale, Ø8 mm1770 N/mm² · IWRC · EN 12385-5 · FoS ≥12
ROPE-8x19-10Steel wire rope 8×19 Seale, Ø10 mmFor 630–1000 KG passenger, 2:1 roping
ROPE-8x19-13Steel wire rope 8×19 Seale, Ø13 mmFor 1275–2500 KG passenger and cargo
RAIL-T70Guide rail T70 (machined)For counterweight / light passenger
RAIL-T89Guide rail T89 (machined)Standard passenger up to 1275 KG
RAIL-T125Guide rail T125 (machined)Heavy passenger, hospital and cargo
SHV-DuctileCast-iron / ductile-iron traction sheaveU-groove or undercut · Eytelwein-matched
BR-RailGuide-rail bracket kitAdjustable, hot-dip galvanized, per rail spacing

Sensors, IoT & Ancillary

Sensors, load-weighing, IoT gateway and shaft accessories.

5 items
Part codeComponentSpecification
GW-Liftech-IoTLiftech Industrial IoT Smart Gateway4G/LAN · CAN/Modbus · offline cache · OTA firmware
LW-LoadLoad-weighing device (rope-head)Pre-torque compensation · overload alarm
ENC-Sin/CosHeidenhain-compatible Sin/Cos encoder1024/2048 ppr · for closed-loop PMSM
LIM-MagMagnetic position switch setTerminal, deceleration, leveling · IP54
LT-PitPit lighting + inspection socket kitIP54 · 20 W LED · EN 81-20 §5.2.1
Parts desk · same-day quote

Need a part fast?

Share the make, model, controller and serial — Liftech's parts desk in Karachi (with Lahore and Islamabad stock) will confirm availability and issue an offer the same working day.

Request part