Engineered for residential towers, office buildings and mixed-use developments across Pakistan. Configurable cabin, door and finish options with Monarch NICE 3000+ control and Fuji Frenic Lift VVVF drive.

Technical data

Rated load: 450 · 630 · 800 · 1000 · 1275 · 1600 KG
Rated speed: 1.0 · 1.5 · 1.75 · 2.0 · 2.5 m/s
Travel / stops: Up to 90 m · up to 32 stops
Drive system: PMSM gearless traction, closed-loop vector
Machine: Torin / Ziehl-Abegg ZAtop SM200 gearless
Controller: Monarch NICE 3000+ (serial, CAN-bus)
VVVF inverter: Fuji Frenic Lift LM2A · regen optional
Suspension: 8×19 Seale rope, Ø10/13 mm, 2:1 roping
Guide rails: T89 / T125 machined, ±0.5 mm plumb
Safety: ARD, UCM, overspeed governor, progressive gear
Standards: EN 81-20 / 81-50 / 81-28 / 81-70 · ISO 9001
Duty cycle: 180 starts/hour · S3 60%

Cabin & signalling

Cabin sizes: 1100×1400 · 1400×1600 · 1600×1700 mm
Door type: Center-opening / side-opening 2P / 4P
Door opening: 700 · 800 · 900 · 1100 mm
Finishes: SS 304 hairline · SS 316 · PVD gold/rose · glass
Ceiling: LED downlight + emergency luminaire
COP / LOP: TFT 7" / 10" · Braille tactile · voice

Engineering features

Group control up to 8 cars with destination dispatch
Regenerative drive option (recovers 20–35% braking energy)
IoT-ready via Liftech Smart Gateway (Modbus/CAN)
Anti-vibration ride quality ≤15 mg horizontal (ISO 18738-1)

View full technical page Request datasheet & quotation

Compact home elevator installed inside a modern Lahore residence

LT-VILLA

MRL residential · low pit · low overhead · whisper-quiet

Home Elevators

Series · LT-VILLA

Discreet residential lifts with bespoke cabin design, low pit and overhead requirements — ideal for villas, townhouses and rooftop-access retrofits.

Technical data

Rated load: 250 · 320 · 400 KG (3–5 persons)
Rated speed: 0.4 · 0.6 m/s
Travel / stops: Up to 15 m · 2–6 stops
Drive system: PMSM gearless MRL, 1.5–3.7 kW
Controller: Monarch NICE 1000 / NICE 3000
Shaft: Concrete or self-supporting steel structure
Pit / overhead: Pit 350–800 mm · overhead 2400–2800 mm
Power supply: 1-phase 220 V or 3-phase 380 V
Standards: EN 81-20 / 81-50 · EN 81-41 (accessibility)

Cabin & signalling

Cabin sizes: 900×1000 · 1000×1250 · 1100×1400 mm
Door type: Automatic center or manual swing
Finishes: Wood veneer · glass · SS 304 · painted steel
Ceiling: LED spot + indirect ambient
COP: Backlit micro-touch, floor label plates

Engineering features

Ultra-quiet ≤55 dB(A) at 1 m in cabin
Home UPS / ARD keeps lift usable during load-shedding
Compact shaft (min 1250×1250 mm structural)
Custom cabin design coordinated with interior architect

View full technical page Request datasheet & quotation

Hospital bed lift with 1400 mm wide stretcher door and antimicrobial stainless steel walls

LT-MED

Stretcher-ready · precision leveling ±3 mm · antimicrobial finishes

Hospital Bed Lifts

Series · LT-MED

Stretcher-ready lifts for hospitals, diagnostic centres and senior living. Engineered to EN 81-20/50 with hospital-priority operation, independent service and dual power.

Technical data

Rated load: 1600 · 2000 · 2500 KG
Rated speed: 1.0 · 1.6 m/s
Travel / stops: Up to 45 m · up to 20 stops
Drive system: PMSM gearless, closed-loop vector
Leveling accuracy: ±3 mm (re-leveling with doors open)
Controller: Monarch NICE 3000+ with hospital priority I/O
Safety: ARD, UCM, dual brake, load-weighing
Standards: EN 81-20/50 · EN 81-70 · EN 81-72 optional

Cabin & signalling

Cabin sizes: 1400×2400 · 1600×2500 · 1800×2700 mm
Door opening: 1100 · 1200 · 1400 mm center-opening 2P
Finishes: AISI 316 · antimicrobial PVC · Corian panels
Handrails: SS 316 tubular, 900 mm above floor
Ceiling: Diffused LED · IP44 emergency light
Signalling: Voice announcement · pictogram · Braille

Engineering features

Hospital-priority key operation and independent service
Isolated ward / OT mode with silent arrival tone
Antibacterial cabin package (JIS Z 2801 tested)
Dual power source with automatic ATS transfer

View full technical page Request datasheet & quotation

Industrial 3000 KG cargo lift in a Pakistani warehouse with reinforced sling and roller-shutter doors

LT-FRT

2000–5000 KG · T125 rails · industrial duty · roller-shutter or bi-parting doors

Heavy-Duty Cargo Lifts

Series · LT-FRT

Freight elevators for textile mills, warehouses, cold storage and food processing — reinforced sling, industrial guide rails and heavy-duty duty cycle. Load-tested at handover per EN 81-50.

Technical data

Rated load: 2000 · 3000 · 4000 · 5000 KG
Rated speed: 0.25 · 0.4 · 0.5 · 0.63 m/s
Travel / stops: Up to 40 m · up to 12 stops
Drive system: PMSM gearless or Montanari geared 2:1
Controller: Monarch NICE 3000+ cargo profile
Guide rails: T89 / T125 machined
Suspension: 8×19 Seale Ø13 mm, 4-rope minimum
Doors: Bi-parting 2B, vertical roller-shutter or manual swing
Overload: Load-weighing with pre-torque compensation
Standards: EN 81-20 / 81-50 · fire-rated E60/E120 optional

Cabin & signalling

Cabin sizes: 1600×2000 up to 2500×3500 mm
Floor: Checker-plate steel or non-slip anti-static
Wall protection: SS 304 bump rails · rubber corner guards
Signalling: Robust illuminated buttons IP54

Engineering features

Trolley / forklift ready loading (subject to configuration)
Continuous S3 40% duty for shift-based operations
PEC-compliant electrical package and load-test certificate
Optional gas-fired or electric shaft heater for cold storage

View full technical page Request datasheet & quotation

Liftech Global commercial high-rise elevators in Pakistan — machine room traction lifts with destination dispatch group control (CE / EN 81-20/50 / ISO 9001:2015)

LT-HRISE

Group control · destination dispatch · energy regeneration

Commercial High-Rise

Series · LT-HRISE

For Grade-A commercial towers where waiting time, journey time and energy efficiency are the primary KPIs. Traffic simulation with RTD3/Elevate delivered as part of the design.

Technical data

Rated load: 1000 · 1275 · 1600 · 2000 KG
Rated speed: 2.5 · 3.0 · 4.0 m/s
Travel / stops: Up to 150 m · up to 40 stops
Group size: Up to 8 cars per group
Control: Destination dispatch (DCS) with lobby kiosks
Drive: Regenerative VVVF (Fuji / Yaskawa)
Ride quality: ≤10 mg horizontal (ISO 18738-1)
Standards: EN 81-20 / 81-50 / 81-72 firefighter option

Cabin & signalling

Cabin sizes: 1600×1700 · 1800×2100 mm
Finishes: Custom stainless, glass, back-lit onyx, timber
Ceiling: Custom architectural LED
COP / LOP: 10" TFT with BMS-linked information layer

Engineering features

Traffic simulation (5-min up-peak, interval, HC-5) at design stage
BMS/BAS integration over BACnet/IP or Modbus TCP
Fire recall (Phase I/II) and firefighter operation ready
Advance-door-opening for shorter door-dwell in DCS mode

View full technical page Request datasheet & quotation

Stainless steel escalator with LED handrail lighting installed in an Islamabad shopping mall

LT-ESC

EN 115-1 heavy-duty · 30°/35° · step widths 600/800/1000 mm

Escalators & Moving Walks

Series · LT-ESC

For malls, metros, airports and public transport hubs — heavy-duty rated with auxiliary brake, step-level monitoring and skirt-safety switches. Commissioning includes full-load run-in and brake torque validation.

Technical data

Type: Commercial · public transport heavy-duty
Incline: 30° · 35°
Step width: 600 · 800 · 1000 mm
Rise: Up to 15 m per unit
Speed: 0.5 · 0.65 · 0.75 m/s
Steps: Die-cast aluminium, comb-plate impact switch
Handrail: Synthetic composite, speed-monitored
Drive: Helical bevel gear, VVVF start/stop
Standards: EN 115-1:2017 · public transport annex

Cabin & signalling

Balustrade: 10 mm tempered glass or SS 304 solid
Skirt panels: SS 304, low-friction coated
Handrail: Black standard · custom colour / illuminated
Lighting: LED under-step, comb-plate and handrail-inlet

Engineering features

Auxiliary brake and operational brake (EN 115-1 §5.4)
Skirt-safety, step-level, missing-step and reversal switches
Auto start/stop with IR passenger detector (energy save)
Anti-slide devices and inspection sockets at both landings

View full technical page Request datasheet & quotation

Explore Liftech

Engineering, parts, brands and compliance — everything behind the catalog.

Services

Installation, modernization, AMC and 24/7 emergency response across Pakistan.

Parts & Components

Monarch, Fuji Drive, Torin, Monadrive, Ziehl-Abegg — genuine controllers, drives and traction machines.

Brands

34+ global OEM brands — KÖHLER, Otis, KONE, Schindler, Mitsubishi, Hitachi, Fujitec and more.

Standards & Compliance

EN 81-20/50, EN 115-1, ASME A17.1, ISO 8100 and PEC-registered engineering.

Technical Downloads

OEM catalogues, wiring diagrams and datasheets for elevator and escalator systems.

Engineering Blogs

Deep-dive articles on elevator brands, ride quality, IoT, fire lifts and modernization.

Coverage · Karachi · Lahore · Islamabad

Supplied, installed and maintained from three regional offices.

Head Office

Karachi

Shahrah-e-Faisal, Karachi, Sindh, Pakistan

+92 21 0000 0000

info@elevatorescalators.com

Mon–Sat · 09:00–18:00 · 24/7 emergency

Regional Office

Lahore

Gulberg III, Lahore, Punjab, Pakistan

+92 42 0000 0000

info@elevatorescalators.com

Mon–Sat · 09:00–18:00 · 24/7 emergency

Regional Office

Islamabad

Blue Area, Islamabad, ICT, Pakistan

+92 51 000 0000

info@elevatorescalators.com

Mon–Sat · 09:00–18:00 · 24/7 emergency

Ready to specify?

Talk to a Liftech engineer about your project.

Send us shaft dimensions, load, travel and stops — we'll return an engineered proposal with cabin, drive, controller and compliance package.

Request quotation +92 300 0000000